CLAMPING CATCH MAINTENANCE.

TM 9-6115-661-13&P

INSTALLATION

1. Place the loop clamp (6) so that mounting holes are in alignment with switch box cover holes.

2. Drop terminal lug end of rope (9) with box wrench (4) through loop clamp (6) as shown in figure 4-11.

3. Install screw (8), two flat washers (3), one terminal lug (7), new lock washer (2) and nut (1) that

secures loop clamp (6) to switch box cover.

4 . Refer to paragraph 4-12 and perform steps 13 through 16 of Inspection.

4-14 CLAMPING CATCH MAINTENANCE.

This task covers: a. Removal

b. Installation

INITIAL SETUP

Materials/Parts

Tools

Rivets, Blind Head

Tool Kit, General Mechanic's

Equipment Conditions

Drill, 1/4-inch

Reference

Riveter, Blind Head

Both generator sets shut down,

Trailer support devices are

lowered, paragraph 2-3.2.1.

Figure 4-12. Clamping Catch Replacement.