Figure 4-11. Switch Box Load Terminal Wrench Assembly Replacement.

TM 9-6115-661-13&P

Figure 4-11. Switch Box Load Terminal Wrench Assembly Replacement.

REMOVAL

1. Refer to paragraph 4-12 and perform steps 7 through 10.

2. Remove nut (1, figure 4-11), lock washer (2), and flat washer (3). Discard lock washer.

3. Remove screw (8), flat washer (3), loop clamp (6), and box wrench (4) with attached rope (9).

REPAIR

When the rope (9) requires replacement, perform the following:

a. Cut old rope (9) from box wrench (4).

b. On new rope, flare each end to prevent unraveling.

c. Install new terminal lug (7) to one end of rope (9).

d. Thread other end of rope (9) through the opening in handle of load terminal wrench (4).

e. Install conductor splice to secure rope (9) to the wrench (4).

Change 3

4-23