PU-801A GROUND STUD REPLACEMENT.

TM 9-6115-661-13&P

4-30 PU-801A GROUND STUD REPLACEMENT.

This task covers: a. Removal

b. Installation

INITIAL SETUP

Equipment Conditions

Tools

Tool Kit, General Mechanic's

Reference

Trailer handbrakes set and front support

Materials/Parts

leg/landing leg lowered; paragraph 2-3.2.1.

Both generator sets shut down; paragraph

Washer, Lock (item 4, appendix I)

REMOVAL

1. Loosen nut (1, figure 4-29) and remove ground wire (2) from ground stud (3).

2. Remove nut (4), lock washer (5), flat washer (6), and ground stud (3).

INSTALLATION

1. Install ground stud (3), flat washer (6), lock washer (5), and nut (4). Tighten nut (4).

2. Install ground wire (2) in slot of ground stud (3) and tighten nut (1).

Figure 4-29. PU-801A Ground Stud Replacement.

Change 3