SWITCH BOX LOAD TERMINAL MAINTENANCE. - TM-9-6115-661-13-P0130

TM 9-6115-661-13&P

4-17 SWITCH BOX LOAD TERMINAL MAINTENANCE.

This task covers: a. Removal

c. Installation

b. Repair

INITIAL SETUP

Tools

Equipment Conditions

Tool Kit, General Mechanic's

Reference

Both generator sets shut down,

Materials/Parts

Trailer support devices are

Terminal, Load

lowered, paragraph 2-3.2.1.

Wire, Round Steel, 0.072 inch diameter

QQ-W-423 Composition 302

REMOVAL

1. Remove 21 screws (2, figure 4-15), lock washers (3), and flat washers (4).

2. Release clamping catch (5) and open load terminal door (1).

CAUTION

The control panel connector P3 is connected to connector J4. Movement of

the switch box cover is limited. To prevent damage to control panel wiring

harness, use caution removing switch box cover. Failure to observe this

caution can result in equipment damage.

3. Carefully position switch box cover (15) in front of switch box assembly.

4. Disconnect P3 (6) from J4 (7).

5. Remove switch box cover (15).

6. Disconnect external load terminal lead from the defective terminal (14).

NOTE

For removal of ground load terminal go to step 8.

7. Remove nut (8), internal tooth lock washer (9), and leads (10) from defective load terminal (14).

8. Remove nut (11) that secures the load terminal (14) to the mounting plate.

9. Remove load terminal (14).