INSTALLATION - TM-9-6115-661-13-P0190

TM 9-6115-661-13&P

INSTALLATION

1. Install bracket (10, figure 5-17), using two bolts (10), four flat washers (9), and two locknuts (7).

2. Place generator mounting rails (1) on trailer frame (6). Align mounting holes in generator mounting

rails (1) with mounting holes in trailer frame (6).

Figure 5-17. Generator Mounting Rails on 1 Ton Trailer.

3. Place a flat washer (3) on each often cap screws (2). Insert cap screws (2) through mounting holes

in generator mounting rails (1) and trailer frame (6).

4. Install a flat washer (4) and a new self-locking nut (5) on each of ten cap screws.

5-15 TRAILER MODIFICATIONS REPAIR (PU-800, PU-801, PU-802, AND AN/MJQ-39 ONLY).

Repair of the rear steps, fender, front steps and front platform is limited to bending, straightening, and

welding. Refer to TM 9-237 for repair procedures.