REPAIR - TM-9-6115-661-13-P0181

TM 9-6115-661-13&P

2. Remove 8 screws (9), flat washers (11), and lock washers (10) that secure control panel assembly

(12). Discard lock washers.

3. Disconnect P3 (7) from J4 (8).

4. Remove the control panel assembly (12).

REPAIR

NOTE

Spare lamps must be tied to ground for electromagnetic interference (EMI) protection.

Refer to appendix G and repair or manufacture wiring harness W20.

INSTALLATION

1. Connect P3 (7) to J4 (8).

2. Position new control panel assembly on mounting plate and align mounting holes.

3. Install new lock washers (10), flat washers (11), and screws (9) that secure control panel assembly

(12) to switch box assembly (4).

4. Close the control panel access cover (5) and secure with clamping catch (6).

5-9 WIRING HARNESS MAINTENANCE

This task covers: a. Removal

c. Installation

d. Inspection

b . Repair

INITIAL SETUP

Equipment Conditions

Tools

Reference

General Mechanic's Tool Kit

Both generator sets shut down,

Materials/Parts

para 2-5.3.1.

Washers, Lock

REMOVAL

1. Remove 21 machine screws (1, figure 5-13), lock washers (2), and flat washers (3) that secure the

switch box access cover (4) to the switch box assembly. Discard lock washers.