|
|
TM 9-6115-661-13&P
REPAIR
WARNING
Before removing trailer leveling-support jack, support rear of trailer with jack
stands. Failure to observe this warning can cause severe injury and/or death.
NOTE
Disassemble the trailer leveling-support jack only to the extent necessary to
replace worn, defective, or damaged parts.
1. Disassemble trailer leveling-support jack.
a.
Clamp leg assembly in a vise with spring pin (2, Figure 4-27) facing up.
b. Drive the spring pin (2) out of upper leg (1) and remove leg base (4).
If defective, remove lubrication fitting (3).
c.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |