 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-6115-661-13&P
b. Installation
This task covers: a. Removal
INITIAL SETUP
Equipment Conditions
Tools
Reference
Tool Kit, General Mechanic's
(item 1, appendix B)
Generator set shut down,
Materials/Parts
Trailer support devices are
lowered, paragraph 2-3.2.1.
Nut, Self-locking
Personnel Required
Two
REMOVAL
NOTE
When replacing fender, remove fire extinguisher bracket for use on new
fender.
1. Remove four self-locking nuts (7, figure 4-21), flat washers (8), and bolts (9), and remove bracket.
2. Remove and discard six self-locking nuts (1), flat washers (2 and 3), and bolts (4). Remove fender (5).
3. Remove deck covering by peeling from fender.
INSTALLATION
1. Position fender (5) on trailer.
2. Install six bolts (4), flat washers (2 and 3), and self-locking nuts (1).
3. Install fire extinguisher bracket (6), screws (9), flat washers (8), cap screws (9), and bracket (10).
4. Install deck covering.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version