|
|
TM 9-2320-209-34-2-2
i. A d j u s t m e n t
(1) First reduction drive gear.
FRAME 1
1.
Working through shaft hole in power leveler mounting flange (1), check that
front edge of intermediate case first reduction drive gear (2) is alined with
front edge of drive clutch and brake first reduction drive pinion (3) as shown.
IF GEARS ARE NOT ALINED, GO TO FRAME 2.
IF GEARS ARE ALINED , GO TO FRAME 3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |