|
|
TM 9-2320-209-34-2-2
FRAME 2
Working at front of clutch case (1), take out four capscrews (2) and
1.
lockwashers (3).
2.
Take off cover (4) and gasket (5).
3.
If intermediate case first reduction drive gear (6) and drive clutch and brake
first reduction drive pinion (7) are alined as shown in view A, add one
shim (8).
4.
If intermediate case first reduction drive gear (6) and drive clutch and brake
first reduction drive pinion (7) are alined as shown in view B, take off one
shim (8).
Put on gasket (5) and cover (4) and aline screw holes.
5.
6.
Put in four capscrews (2) and lockwashers (3).
7.
Do frame 1 again.
GO TO FRAME 3
17-551
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |