|
|
TM 9-2320-209-34-2-1
TOOLS: No special tools required
SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Clean rags
PERSONNEL: One
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
a. Preliminary Procedures.
NOTE
Preliminary procedures (4), (5), (11), and (12)
are not required for repair of the steering knuckle.
(1) Drain front axle housing. Refer to LO 9-2320-209-12/1.
(2) Jack up and support truck. Refer to TM 9-2320-209-20.
(3) Remove front wheels. Refer to TM 9-2320-209-10.
(4) Remove front propeller shaft. Refer to Propeller Shaft and Universal
Joint Removal and Replacement, TM 9-2320-209-20.
(5) Remove brake lines at tee fittings on front axle. Refer to Hydraulic
Lines, Hoses and Fitting Removal and Replacement, TM 9-2320-209-20.
(6) Remove drag link. Refer to TM 9-2320-209-20.
(7) Remove hub and drum assemblies. Refer to TM 9-2320-209-20.
(8) Remove front axle shaft. Refer to TM 9-2320-209-20.
(9) Remove steering knuckle boot guard and steering knuckle boot. Refer
to TM 9-2320-209-20.
(10) Remove tie rod. Refer to TM 9-2320-209-20.
(11) Remove front axle assembly. Refer to para 10-3.
(12) Remove differential. Refer to para 10-7.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |