|
|
TM 9-2320-209-34-2-1
b.
Disassembly.
Working on left side of axle, take off two nuts (1) and lockwashers (2).
1.
2.
Tap steering arm (3) at point (4) to loosen four split dowels (5). Take out
split dowels. Take off steering arm.
3. Take out lubrication fitting (6).
NOTE
Do not take out ball stud (7) unless it is damaged. Refer
to para 10-4d for inspection procedures.
4. Take out cotter pin (8). Take off nut (9). Take out ball stud (7).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |