REAR SPRING SEAT REPAIR - continued - TM-9-2320-209-20-3-20522

TM 9-2320-209-20-3-2

Assembly.

FRAME 1

Using finger, put thin film of grease in bore of spring seat (1) where bearing

cups (2) will go. Put spring seat on plywood (3) to keep spring seat from

getting damaged.

Put bearing cup (2) on bore in spring seat (1) with thin edge of bearing cup

facing up.

Put remover and replacer tool (4) in bearing cup (2). Spread open remover

and replacer tool and turn screw (5) all the way in.

Using hammer, hammer on screw (5) until bearing cup (2) is seated.

Turn spring seat (1) over so bearing cup (2) is down.

Do steps 1 through 4 again on other bearing cup.

NOTE

Follow-on Maintenance Action Required:

Put rear spring seat back on truck. Refer to para

17-8.

END OF TASK