REAR SPRING SEAT REMOVAL AND REPLACEMENT.

TM 9-2320-209-20-3-2

17-8. REAR SPRING SEAT REMOVAL AND REPLACEMENT.

Punch

TOOLS: 1/2-inch wrench

Needle nose pliers

1 1/16-inch wrench

Jack (2)

Wheel bearing nut wrench,

Flat-tip screwdriver

pn 7076869

Replacer, pn C-10937827

Lubricator bearing packer

Torque wrench, 600 pound-

Jack stand (2)

feet capacity

SUPPLIES: Cover gasket

Nut lock

Artillery and automotive grease, type GAA, MIL-G-10924

Rag

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, front

wheels chocked.

(1) Jack up rear of truck and remove rear wheels. Refer to

TM 9-2320-209-10.

(2) Put safety jacks under axle housings. Jack truck down onto safety jacks.

Jack up cross shaft near spring seat until jack holds. Refer to Part 1, para 11-3.

b. Removal.

Using 1/2-inch wrench, unscrew and take out six screws (1) and

2. Take off cover (3) and gasket (4). Throw gasket away.

GO TO FRAME 2