|
|
TM 9-2320-209-20-3-2
FRAME 2
1.
Put C-clamp (1) on spring (2).
Turn handle on C-clamp to squeeze spring
leaves together.
2.
Using 11/16-inch wrenches, screw on and tighten screw (3) and nut (4).
Unscrew and take off C-clamp (1).
3.
Put four spacers (5) in four clips (6) and aline holes.
4.
Using 9/16-inch wrenches, screw on and tighten four screws (7) and four
nuts (8) in four spacers (5) and four clips (6). Do not overtighten nuts
Clips should not bind spring (2).
5.
Using hammer, peen over ends of five screws (3 and 7).
NOTE
Follow-on Maintenance Action Required:
1. Replace rear leaf spring in truck. Refer to para
17-6.
2. Lower truck and take away jack. Refer to Part 1,
para 11-3.
END OF TASK
17-37
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |