 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-6115-661-13&P
6. Remove handbrake bracket (19) and handbrake mechanism.
7. Remove two self-locking nuts (11), flat washers (12), and screws (23) that secure brake cable bracket
(24) to front step (3). Remove cable (20). Discard self-locking nuts.
8. Remove seven self-locking nuts (2), flat washers (1), screws (10), and flat washers (1) securing front
step (3) to front edge offender. Discard self-locking nuts.
9. Remove three self-locking nuts (9), flat washers (5), screws (4), and flat washers (5) securing the
front step (3) to trailer flame. Discard self-locking nuts.
10. Remove five self-locking nuts (8), flat washers (7), and screws (6) securing front step (3) to chassis.
Discard self-locking nuts.
11. Remove front step (3).
INSTALLATION
1.
Position front step (3) on cross braces and trailer frame. Insert handbrake cable (20) through hole in
front step (3).
2.
Install five screws (6), flat washers (7), and new self-locking nuts (8) that secure front step (3) to
channel.
Install three screws (4), flat washers (5), and new self-locking nuts (9) that secure front step (3) to
3.
trailer frame.
Install seven screws (10), flat washers (1), and new self-locking nuts (2) that secure front step (3) to
4.
fender.
Install two screws (23), flat washers (12), and new self-locking nuts (11) that secure bracket to front
5.
step (3).
Position handbrake bracket (19) and handbrake lever mechanism (15) on front step.
6.
Install two screws (14) that secure cable bracket to front step.
7.
Position handbrake cable (20) on handbrake lever mechanism (15). Insert clevis pin (22) and spacer
8.
(16), and secure with cotter pin (14).
Install either fire extinguisher bracket or accessory box removed in step 1. Refer to paragraph 4-19
9.
to install accessory box. Install fire extinguisher bracket.
4-42
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version