Grounding of Generator Set

TM 9-6115-661-13&P

(5) Refer to TM 9-2330-202-14&P (1 ton trailer) or TM 9-2330-392-14&P (high mobility trailer) and

disconnect trailer from towing vehicle.

(6) Pull out pin (1, figure 2-5) that secures rear leveling-support jack (2) in travel position,

(7) Pull rear leveling-support jack (2) down. Insert pin (1) in bracket (3) to secure rear leveling-

support jack (2) in down position.

(8) Turn leg base (4) until it makes firm contact with ground.

d. Remove fire extinguisher from bracket. Locate fire extinguisher on ground away from equipment.

2-3.3 Grounding of Generator Set. Ground the equipment in accordance with Army Field Manual

Field Manual 20-31. Typical ground rod installations are shown in Figure 2-6. If a ground rod is used,

install and connect it as follows:

NOTE

The Power Plant AN/MJQ-39 consists of two power units. One ground rod

must be installed for each power unit.

Figure 2-6. Typical Ground Rod Installations.