Section Il. EQUIPMENT DESCRIPTION - TM-9-6115-661-13-P0030

TM 9-6115-661-13&P

Section Il. EQUIPMENT DESCRIPTION

1-9 EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES.

1-9.1 Characteristics. Each generator set is mounted on a modified trailer an M200A1, 2 l/2 Ton

Trailer for the PU-800 and PU-802, an M116A3 1 Ton Trailer for the PU-801, and a High Mobility Trailer

for the PU-801A Trailers are modified to include generator mounting rails, special fenders, an accessory

box, and a fire extinguisher bracket. The M116A3 Trailer also has a heavy duty axle and heavy duty

springs to support the generator set. Refer to TM 9-2330-205-14&P for detailed information about the

M200A1, TM 9-2330-202-14&P for detailed information about the M116A3, and TM 9-2330-392-14&P for

detailed information about the high mobility trailer.

1-9.1.1 Power Unit PU-800. The PU-800 has a Tactical Quiet Generator Set, DOD Model MEP-814A,

liquid-cooled, diesel engine driven unit, with a load capacity of 15 kW, mounted on a single 2 l/2 ton

trailer. Refer to TM 9-6115-643-10 for a detailed information about the generator set.

1-9.1.2 Power Units PU-801 and PU-801A. The PU-801 and PU-801A each have a Tactical Quiet

Generator Set, DOD MEP-804A liquid-cooled, diesel engine driven unit, with a load capacity of 15 kW.

The generator for PU-801 is mounted on a modified 1 ton trailer. The generator for PU-801A is mounted

on a modified high mobility trailer. Refer to TM 9-6115-643-10 for detailed information about the

generator set.

1-9.1.3 Power Unit PU-802. The PU-802 has a Tactical Quiet Generator Set, DOD Model MEP-804A

liquid-cooled, diesel engine driven unit, with a load capacity of 15 kW, mounted on a modified 2 1/2 ton

trailer. Refer to TM 9-6115-643-10 for detailed information about the generator set.

1-9.1.4 Power Plant AN/MJQ-39. The AN/MJQ-39 Power Plant consists of two PU-800 Power Units, a

power cable and a switch box. The PU-800 Power Units have been identified as either unit A or unit B.

The Switch Box is mounted on unit A and the cable is stored on unit B. The electrical output and towing

information are the same as listed for the PU-800 in paragraph 1-9.2.1.

1-9.2 Capabilities and Features. The PU-800 and PU-802 are mounted on a modified M200A1, 2 1/2

ton trailer. The PU-801 is mounted on a modified M116A3, 1 ton, two-wheeled trailer. The PU-801A is

mounted on a modified high mobility, two-wheeled trailer. The towing capabilities and features are as

follows:

1-9.2.1 Power Unit PU-800.

TOWING VEHICLE . . . . . . . . . . . . . . . . . . . . . . . .

2 1/2 Ton 6x6 or 5 Ton 6x6

TIRE PRESSURE (Highway) . . . . . . . . . . . . . . . . .

35 psi (241.3 kPa)

ELECTRICAL OUTPUT - 400 Hz:

120/208 volts, three phase, 400 Hz . . . . . . . . . . .

52 amps

240/416 volts, three phase, 400 Hz . . . . . . . . . . .

26 amps

1-9.2.2 Power Units PU-801 and PU-801A.

TOWING VEHICLE

PU-801 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CCUV or HMMWV

PU-801A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HMMWV

1-5

Change 3