Section 1. GENERAL INFORMATION - TM-9-6115-661-13-P0027

TM 9-6115-661-13&P

Section 1. GENERAL

1-1 SCOPE.

This manual is for your use in operating and maintaining the Power Unit PU-800, Power Unit PU-801,

Power Unit PU-801A, Power Unit PU-802, and Power Plant AN/MJQ-39 (figure 1-1 through figure 1-3).

The manual covers operating instructions and operator, unit and direct support maintenance requirements

for the equipment. It also contains a Repair Parts and Special Tools List (RPSTL) for the power units and

power plant. The Power Units PU-801, PU-801A and PU-802 are mobile units used to supply 15 kW of

50/60 Hz power. The PU-800 is a mobile unit used to supply 15 kW of 400 Hz power. Power plant

AN/MJQ-39 consists of two PU-800 Power Units, a switch box, and power cable.

1-2 MAINTENANCE FORMS AND RECORDS.

Department of the Army forms and procedures used for equipment maintenance will be those prescribed

by DA Pam 738-750 (The Army Maintenance Management System (TAMMS) Maintenance Management

UPDATE).

1-3 DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE.

Destruction of Army materiel to prevent enemy use shall be in accordance with TM 750-244-3.

1-4 PREPARATION FOR STORAGE AND SHIPMENT.

Refer to chapter 4, section VII for detailed instructions.

Figure 1-1. Curbside Front Three Quarter View.

1-2