SPECIFIC INSPECTION AND SERVICING INSTRUCTIONS

TM 9-2320-386-24-1-1

0021 00

c. Read Processing and Deprocessing Record of Shipping, Storage, and Issue of Vehicles and Spare

Engines, tag (DD Form 1397), and follow all precautions listed. This tag should be attached to steering

wheel, shift column, or battery switch.

NOTE

If vehicle has been driven to using organization, all the above

work should have been completed.

SPECIFIC INSPECTION AND SERVICING INSTRUCTIONS

The following steps should be taken while performing specific inspections and services:

a. Perform the semiannual (S), six months, or 6,000 miles (9,654 kilometers) Preventive Maintenance

Checks and Services (PMCS) listed in WP 0025 00 of this chapter.

b. Lubricate the vehicle according to the instructions found in WP 0023 00. Do not lubricate gearcases

or engine unless processing tag states that the oil is unsuitable for 500 miles (805 kilometers) of operation.

If oil is suitable, just check level (TM 9-2320-386-10).

c. Schedule semiannual service on DD Form 314 (Preventive Maintenance Schedule and Record Card).

d. If vehicle is delivered with a dry-charged battery, activate it according to TM 9-6140-200-14.

e. Check vehicle coolant level and determine if solution is proper for climate. (Refer to TB 750-651 for

preparation of antifreeze solutions.)

END OF WORK PACKAGE

0021 00-2