Table 2. STE/ICE-R GO-Chain Tests - continued

TM 9-2320-386-24-1-1

0016 00

Table 2. STE/ICE-R GO-Chain Tests (Contd)

NOTE

Test G01, VTM Connections and Checkout, must be

performed before running any other STE/ICE-R test.

DCA

ENGINE WARMUP/COOLANT CHECK

G05

MODE

CHECK FOR LEAKS AND COOLANT TEMPERATURE:

Check vehicle for oil, fuel, and coolant leaks. Refer to

appropriate section to repair any leaks.

Warm up engine to normal operating temperature

160-210F (71-99C).

Does temperature gauge read within limits after a

normal warmup period?

YES

Is temperature too high?

YES

Proceed to next desired test.

Proceed to Gauge Test, NG31.

Refer to Mechanical Troubleshooting

(WP 0009 00) to troubleshoot engine

cooling systems for high temperature.

If no problems are found, proceed to

NG31

Gauge Test, NG31.

NOTE

NG31

After completing repair, rerun the GO-

Chain tests to verify that the problem is

fixed and that no other problems exist.