 |
|||
|
|
|||
|
Page Title:
EXHAUST BLOWER DUCT ASSEMBLY REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
EXHAUST BLOWER DUCT ASSEMBLY REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
M185A3, M109A3
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Battery ground cable disconnected
(WP 0126 00).
Exhaust blower motor and bracket removed
(WP 0301 00).
REMOVAL
1.
Remove four screws (1) and adapter (3) from duct assembly (2).
2.
Remove eight screws (5) and four angles (4) from van wall (7).
3.
Remove four screws (6) and duct assembly (2) from van wall (7).
INSTALLATION
1.
Install duct assembly (2) on van wall (7) with four screws (6).
2.
Install four angles (4) on van wall (7) with eight screws (5).
3.
Install adapter (3) on duct assembly (2) with four screws (1).
4.
Install exhaust blower motor and bracket (WP 0301 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
3
2
1
7
4
6
5
4
END OF WORK PACKAGE
0337 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version