|
|
TM 9-2320-361-24-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
INTERMEDIATE TURN SIGNAL REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
All
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
Lockwasher (item 220, WP 0470 00)
Two lockwashers (item 195, WP 0470 00)
Two O-rings (item 283, WP 0470 00)
REMOVAL
1.
Remove amber lens (4), red lens (1), two O-rings (2), and lamp (3) from bracket (14). Discard
O-rings (2).
2.
Disconnect wire (13) from connector (12).
3.
Remove nut (5), lockwasher (6), washer (15), and bracket (14) from brush guard (7). Discard
lockwasher (6).
4.
Remove two screws (11), lockwashers (10), nuts (9), and brush guard (7) from bracket (8). Discard
lockwashers (10).
INSTALLATION
1.
Install brush guard (7) on bracket (8) with two screws (11), new lockwashers (10), and nuts (9).
2.
Install bracket (14), washer (15), new lockwasher (6), and nut (5) on brush guard (7).
3.
Connect wire (13) to connector (12).
4.
Install lamp (3), two new O-rings (2), red lens (1), and amber lens (4) on bracket (14).
5.
Connect battery ground cable (WP 0126 00).
6.
Check operation of intermediate turn signal light (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
7
3
2
4
2
8
6
1
9
5
14
10
13
15
11
12
END OF WORK PACKAGE
0121 00-1/2 blank
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |