|
|
TM 9-2320-361-24-1
0120 00
SEALED BEAM AND HEADLAMP HOUSING ADJUSTMENT (Contd)
ADJUSTMENT
1.
Using chalk, draw a horizontal line (3) on a wall the height of center of headlamp (6).
2.
Park truck facing wall so headlamps (6) are 25 ft (7.62 m) from wall.
3.
Using chalk, draw a vertical line (1) through horizontal line (3) so it is in line with center of
headlamp (6).
4.
Turn headlamps (6) on low beam (TM 9-2320-361-10).
5.
Adjust headlamp (6) horizontal direction with adjusting screw (5) until left edge of bright light
area (2) on wall is 26 in. (5.0815.24 cm) right of vertical line (1).
6.
Adjust headlamp (6) vertical direction with adjusting screw (4) until top edge of bright light
area (2) on wall is touching lower side of horizontal line (3).
7.
Repeat steps 1 through 6 for opposite headlight (6).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
VERTICAL WALL
1
3
1
~
2
2
5
25 FEET
6
4
(8m)
6
6
END OF WORK PACKAGE
0120 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |