 |
|||
|
|
|||
|
Page Title:
FRONT WIRING HARNESS REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
FRONT WIRING HARNESS REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Materials/Parts (Contd)
All
Six locknuts (item 145, WP 0470 00)
Five locknuts (item 129, WP 0470 00)
Tools and Special Tools
Two tiedown straps (item 413, WP 0468 00)
Adhesive sealant (item 5, WP 0468 00)
General mechanic's tool kit
(item 116, WP 0469 00)
Reference
Multimeter (item 51, WP 0469 00)
Tool kit, electrical (item 114, WP 0469 00)
WP 0473 00
Torque wrench, 3/8-in. drive
Equipment Condition
(item 138, WP 0469 00)
Parking brake set and wheels chocked
Materials/Parts
(TM 9-2320-361-10).
Four lockwashers (item 208, WP 0470 00)
Hood raised and secured (TM 9-2320-361-10).
Two lockwashers (item 210, WP 0470 00)
Battery ground cable disconnected
Three lockwashers (item 229, WP 0470 00)
Accessory power switch removed (WP 0104 00).
NOTE
Prior to removal, tag lead wires for installation.
REMOVAL
1.
Disconnect wire (9) from horn wire (8).
2.
Disconnect wires (3) and (5) from left headlamp (1).
3.
Disconnect wire (11) from blackout drive lamp (12).
4.
Remove nut (7) and clamp (6) from front wiring harness (10) and stud (13).
5.
Remove tiedown strap (4) from front wiring harness (10) and brush guard support (2). Discard
tiedown strap (4).
2
1
3
4
13
12
5
6
11
7
8
10
9
0091 00-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version