|
|
TM 9-2320-361-24-1
0091 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
REMOVAL (Contd)
NOTE
Steps 6 through 9 cover the left side front composite lights.
6.
Remove four nuts (8) and plate (5) from four screws (15).
7.
Disconnect wires (4), (6), and (10) from left composite light wires (3), (1), and (16) and remove plate
(5) from wires (4), (6), and (10).
8.
Remove grommet (7) from plate (5) and grommet (17) from fender (13).
9.
Remove two nuts (14), screws (12), and clamps (11) from fender support (2) and front wiring
harness (9).
10.
Repeat steps 6 through 9 for right side front composite lights.
11.
Remove two screws (49), lockwashers (58), and cover (57) from alternator (38). Discard lockwashers (58).
12.
Remove two screws (46), lockwashers (45), plate (44), and spacer (43) from alternator (38). Discard
lockwashers (45).
13.
Disconnect wire (41) from alternator wire (42).
14.
Remove nut (54), lockwasher (53), and wire (52) from terminal (51). Discard lockwasher (53).
15.
Disconnect wire (48) from temperature sending unit (19).
16.
Disconnect wire (21) from preheater wire (20).
17.
Disconnect two wires (50) from horn (30).
18.
Disconnect two wires (25) from right headlamp (26).
19.
Repeat step 18 for left headlamp.
1
17
16
2
15
14
13
3
12
4
11
5
10
6
7
9
8
0091 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |