 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
f.
Assembly.
FRAME 1
1.
If bearing (1) was taken out, pack new bearing with type GAA grease,
MIL-G-10924.
2.
Press bearing (1) into housing (2).
3.
Place retainer (3) on housing (2). Put on four capscrews (4).
4.
Tie capscrews (4) together with safety wire (5).
5.
If oil seal (6) was taken out, press new seal into housing (2). Be sure
that seal lip faces inside of bearing housing.
6.
Place nut (7) on pin (8).
Put pin (8) onto housing (2) and tighten with nut (7).
7.
GO TO FRAME 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version