 |
|||
|
|
|||
|
Page Title:
Inspection and Repair - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 5
NOTE
Readings must be within limits given in table 18-4. If
readings are not within given limits, throw away part
and get a new one.
Check that drum lock poppet (1) and drum lock poppet knob (2) have no
1.
cracks or other damage. If parts are damaged, get new ones.
Measure free length of drum lock poppet spring (3). Measure length of spring
2.
when under load of 17.3 pounds.
Check that clutch shifter fork shaft (4) and clutch control lever (5) have no
3.
cracks or other damage. If parts are damaged, get new ones.
Check that clutch control lever ball (6) and clutch control lever ball spring (7)
4.
are not grooved, cracked or damaged. If parts are damaged, get new ones.
Measure free length of clutch control lever ball spring (7). Measure length of
5.
ball spring when under a load of 45 pounds.
Check that end frame (8) and rear channel (9) are not cracked or damaged.
6.
If parts are damaged, get new ones.
GO TO FRAME 6
Clutch Control Lever Ball Spring) Wear Limits
Size and Fit
Wear Limit
Index
of New Parts
Item/Point of Measurement
(inches)
Number
(inches)
3
None
1 29/32
Drum lock poppet spring free
length
Drum lock poppet spring length
1
None
3
at 17.3 pounds compression
None
Clutch control lever ball spring
0.6875
7
free length
None
0.4800
Clutch control lever ball spring
7
at 45 pounds compression
18-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version