 |
|||
|
|
|||
|
Page Title:
VERTICAL LEVELING WORM GEAR AND HOUSING REMOVAL, REPAIR, REPLACEMENT, AND ADJUSTMENT (TRUCK M764) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-2
Adjustment.
g.
FRAME 1
Tighten screw (1).
1.
2.
Turn shaft (2) until slot in thrust washer (3) is under screw (4).
3.
Turn screw (4) until it touches thrust washer (3), then back screw off 1/4 turn.
NOTE
Do not allow dog-point end of screw (5) to enter slot in
adjusting bearing (6).
4.
Turn screw (5) into adjusting bearing (6).
5.
Using worm adjusting bearing wrench, turn adjusting bearing (6) so that gear
shaft (2) does not move from end to end.
6.
Check that shaft (2) turns freely and that it moves as little as possible from end
to end.
7.
Turn screw (5) until it touches bearing (6), then back screw off 1/2 turn.
8.
Tighten screw (7) and check that shaft (2) turns freely.
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version