|
|
TM 9-2320-209-34-2-1
c.
Replacement.
NOTE
Crankshaft and camshaft gears must be put on, and cam-
shaft gear retaining nut put on and tightened as soon as
possible after the gears are heated.
1.
Heat crankshaft gear (1) and camshaft gear (2) to 250 F.
2.
Aline keyway in crankshaft gear (1) with key on crankshaft (3) and push
crankshaft gear in place on crankshaft, making sure crankshaft gear teeth
mesh with teeth on oil pump idler gear (4).
CAUTION
Do not turn crankshaft gear (1) while camshaft gear (2)
is off or valves will be damaged.
3. As camshaft gear (2) is being put on to camshaft (5), aline keyway in camshaft
gear with key on camshaft.
4. Aline timing marks (6) on camshaft gear (2) with timing mark (7) on crank-
shaft gear (1).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |