REAR WINCH DRUM CLUTCH LEVER AND GUIDE PLATE REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M756A2).

TM 9-2320-209-20-3-4

19-9. REAR WINCH DRUM CLUTCH LEVER AND GUIDE PLATE REMOVAL, REPAIR,

AND REPLACEMENT (TRUCK M756A2).

TOOLS:

Hammer

1/8-inch punch

9/16-inch wrench

Flat-tip screwdriver

Five-foot prybar

Vise

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

PERSONNEL:

Two

Truck parked, engine off, handbrake set.

EQUIPMENT

CONDITION:

a. Removal.

FRAME 1

Working in between cab protector and cab and using hammer and punch,

drive out pin (1) holding drum clutch lever (2) to clutch shaft (3).

Using 9/16-inch wrench, unscrew and take out two screws, lockwashers,

and flat washers (4) from guide plate (5).

Take off data plate (6) and guide plate (5).

Using screwdriver, pry drum clutch lever (2) from clutch shaft (3). Take

out drum clutch lever (2).

END OF TASK