 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-20-3-4
(2) Winch sprocket assembly.
FRAME 1
1.
Put hub (1) and sprocket (2) on winch shaft (3) and line up hole in winch
shaft with holes in hub and sprocket.
2. Using hammer and punch, drive pin (4) into winch shaft (3) and hub (1). Pin
must be only in hub and shaft so sprocket will turn.
3. Turn sprocket (2) one-quarter turn and put shear pin (5) through holes in
sprocket and hub (1).
4. Using needle nose pliers, put cotter pin (6) through hole in shear pin (5) and
bend open ends of cotter pin.
NOTE
Follow-on Maintenance Action Required:
Replace winch drive chain. Refer to para 19-13.
END OF TASK
TA
080918
19-42
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version