FRONT WINCH REMOVAL AND REPLACEMENT.

TM 9-2320-209-20-3-4

19-4. FRONT WINCH REMOVAL AND REPLACEMENT.

TOOLS: 3/4-inch wrench

Chain sling

Hoist

SUPPLIES: Wood blocks

PERSONNEL: Two

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Remove front winch propeller shaft. Refer to para 19-5.

(2) Remove front winch cable. Refer to para 19-10.

b. Removal.

FRAME 1

1. Put chain sling (1) around drum of winch (2) and join chain sling

to hoist.

2. Raise hoist enough to hold weight of winch (2).

3. Using 3/4-inch wrench, unscrew and take out six screws (3),

lockwashers (4), and flat washers (5).

4. Do step 3 again on other side of winch (2).

Soldier A 5. Guide winch (2) while soldier B lifts it off truck.

Soldier B 6. Using hoist, lift winch (2) off truck and set it down on wood

blocks.

Soldier A 7. Unhook chain sling (1) from hoist and take it off drum of winch

(2).

END OF TASK

TA 080866