DELIVERY PUMP STRAINER AND GASKET REMOVAL AND REPLACEMENT

9-2320-209-20-3-3

18-34. DELIVERY PUMP STRAINER AND GASKET REMOVAL AND REPLACEMENT.

TOOLS: 3/4-inch wrench

Scraper

SUPPLIES: Delivery pump gasket

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Compressed air source, 30 psi max

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

WARNING

Smoking, flame, sparks, and glowing or hot

objects are not allowed within 50 feet of work

area. Fuel may burn, causing explosion, injury

to personnel, and damage to equipment.

a. Removal.

FRAME 1

Using wrench, unscrew and take out four screws (1). Take off four lock-

washers (2).

Take off strainer cover (3) and gasket (4). Throw away gasket.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

3. Using solvent, clean strainer cover (3). Use scraper, if needed, to get off

all gasket pieces.

GO TO FRAME 2