|
|
TM 9-2320-209-20-3-2
FRAME 3
NOTE
If four plastic ties holding brake lines on torque
rods were taken off, put on new plastic ties.
Put four clamps (1) holding two brake lines (2) on two upper torque rods (3).
1.
Using 7/16-inch wrenches, screw on and tighten four capscrews (4) and
2.
four nuts (5).
NOTE
Follow-on Maintenance Action Required:
1.
Replace left side spring saddle. Refer to para 17-8.
Replace all rear wheels. Refer to TM 9-2320-209-10.
2.
Lower rear axle housings. Refer to para 11-3.
3.
END OF TASK
17-68
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |