FRONT LEAF SPRING ASSEMBLY REPAIR - continued

TM 9-2320-209-20-3-2

Cleaning, Inspection, and Repair.

FRAME 1

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

1. Using wire brush, clean off any dirt, rust or corrosion.

2. Clean all parts in solvent.

3. Check that all parts are not cracked, worn, broken, or damaged in any other

way.

4. If spring eye sleeve bearings (1) or shackle pin sleeve bearing (2) are worn

or damaged, using arbor press, press them out. Get new ones in their place.

5. Throw away any worn or damaged parts and get new ones in their place.

END OF TASK