|
|
TM 9-2320-209-20-3-2
FRAME 5
1.
Using 1/4-inch center punch and hammer, make a shallow hole in center of
rivet (1).
2.
Using drill press with 3/8-inch drill bit, drill out rivet (1).
3.
Using 3/8-inch driving pin punch and hammer, drive out rivet (1). Throw
away rivet and take off clip (2).
4.
Do steps 1 through 3 again for three clips (3, 4, and 5).
END OF TASK
17-19
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |