|
|
TM 9-2320-209-20-1
Table 1-1. Organizational Preventive Maintenance Checks and Services Semiannual Schedule - Cont
Item
Procedures
Item
To Be
Check for and Have Repaired,
No.
Inspected
Replaced, Adjusted as Necessary
9.1
(e) Inspect parking brakeshoes for wear. Replace both if lining thickness is 3/16 in.
(cont)
(4.76 mm) or less. Refer to Vol 3, para 13-4.
(f) Inspect parking brake cable, lever, and brakeshoe assembly for binding and loose
or missing components. Tighten components if loose or replace if missing or
damaged. Refer to Vol 3, para 13-5 and 13-6.
Parking Brake Drum
(g) Check parking brakeshoe clearance bet ween inner and outer parking brake
linings and parking brake drum at both ends (A and B), at the same time. If
parking brakeshoe clearance is not 0.015 in. (0.397 mm), adjust parking brake as
necessary. Refer to Vol 3, para 13-7.
10
Front Axle
1. Using torque wrench with 3/4-inch
socket, tighten front axle drive
flange bolts (1) to 60 to 80 Ib-ft
(81-108 Nm).
Change 1 1-9
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |