|
|
TM 9-2320-209-20-1
Table 1-1. Organizational Preventive Maintenance Checks and Services Semiannual Schedule - Cont
Item
Procedures
Item
To Be
Check for and Have Repaired,
No.
Inspected
Replaced, Adjusted as Necessary
9.1
Brake system
(c) Inspect air-hydraulic cylinder (7) to make sure it is not loose, leaking, or damaged.
(cont)
If loose, tighten. If damaged, replace. Refer to Vol 3, para 13-14.
WARNING
Make sure new longer front brake shoe hoses,
currently used on 5 ton trucks are installed on all 2
1/2 ton trucks. Old, shorter front brake hoses are
subject to failure during full steering travel and must
be replaced with new, longer front brake hoses.
Failure to do this could result in injury or death to
personnel.
(d) Inspect all flexible hydraulic brake hoses for bulges, pinches, cracks, crimping
chafing, abrasions, or leaks. If any of these conditions exist, replace or reposition
hoses to prevent failure. Check front brake hoses (11) for loose or missing
fittings, and make sure they are long enough to allow full steering travel. If brake
hose (11) is too short, it must be replaced with new, longer hose. Refer to Vol 3,
para 13-13.
1-8.2 Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |