UPPER ROOF ACCESS STEP

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0028 00

UNIT MAINTENANCE

UPPER ROOF ACCESS STEP

THIS SECTION COVERS:

Replace

INITIAL SETUP:

Personnel Required: One

Maintenance Level - Unit

Materials/Parts

Tools and Special Tools

General Mechanic Tool Kit (WP 0041, Table 2,

Item 1)

NOTE

If replacing the lower roof access step, refer to WP 0033 for maintenance

instructions.

REPLACE

To replace either of the two upper roof access steps (1), remove the two hex head bolts (2) of the roof

access step being replaced.

Loosen and remove the hex head bolts (2), and lock washers (3).

Remove the defective roof access step (1).

Install a new roof access step (1) into position on the side wall of the CBC.

Align the holes on the roof access step with the holes on the side wall of the CBC.

Install the two lock washers (3) followed by the two hex head bolts (2) through the roof access step and

into the threaded inserts (4) permanently installed in the side wall of the CBC.

Tighten both bolts securely.

0028 00-1