Appendix F. UNIT AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST

TM 9-6115-663-13&P

APPENDIX F

UNIT AND DIRECT SUPPORT MAINTENANCE

REPAIR PARTS AND SPECIAL TOOLS LIST

Section I. INTRODUCTION

F-1 SCOPE.

This RPSTL lists and authorizes spares and repair parts; special tools, special test, measurement, and

diagnostic equipment (TMDE); and other special support equipment required for performance of operator,

unit, and direct support maintenance of the Power Unit PU-805, PU-806, and Power Plant AN/MJQ-41. It

authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as indicated

by the source, maintenance. and recoverability (SMR) codes.

F-2 GENERAL.

In addition to Section I, Introduction, the Repair Parts and Special Tools List is divided into the following

sections:

F-2.1 Section II. - Repair Parts List. A list of spares and repair parts authorized by this RPSTL for

use in the performance of maintenance. The list also includes parts which must be removed for

replacement of the authorized parts. Parts lists are composed of functional groups in ascending

alphanumeric sequence, with the parts in each group listed in ascending figure and item number

sequence.

F-2.2 Section III - Special Tools List. A list of special tools, special TMDE, and other special support

equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION

AND USABLE ON CODE (UOC) column) for the performance of maintenance. There is no Section III

with this appendix.

F-2.3 Section IV. - Cress-reference Indexes. A list, in National item identification number (NIIN)

sequence, of all National stock numbered items appearing in the listings, followed by a list in

alphanumeric sequence of all part numbers appearing in the listing. National stock numbers and part

numbers are cross-referenced to each illustration figure and item number appearance. The figure and

item number index lists figure and item number in alphanumeric sequence and cross-references NSN,

CAGEC and part number.

F-3 EXPLANATION OF COLUMNS (SECTIONS II and Ill).

F-3.1 ITEM NO. (Column (1)). Indicates the number used to identify items called out in the

illustration.

Change

F-1