 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-6115-663-13&P
INSTALLATION
Position front step (3) on cross braces and trailer frame. Insert handbrake cable (20) through hole in
1.
front step (3).
2.
Install five screws (6), flat washers (7), and new self-locking nuts (8) that secure front step (3) to
chassis.
Install three screws (4), flat washers (5), and new self-locking nuts (9) that secure front step (3) to
3.
trailer frame.
4. Install seven screws (10), flat washers (1), and new self-locking nuts (2) that secure front step (3) to
fender.
Install two screws (23), flat washers (12), and new self-locking nuts (11) that secure bracket to front
5.
step (3).
Position handbrake bracket (19) and handbrake lever mechanism (15) on front step.
6.
Install two screws (14) that secure cable bracket to front step.
7.
Position handbrake cable (20) on handbrake lever mechanism (15). Insert clevis pin (22) and spacer
8.
(16), and secure with cotter pin (13).
Install either fire extinguisher bracket or accessory box removed in step 1. Refer to paragraph 4-19
9.
to install accessory box Install fire extinguisher bracket (paragraph 4-24).
b. Installation
This task covers: a. Removal
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic's
Reference
(item 1, appendix B)
Trailer support devices are
lowered, paragraph 2-3.2.1.
Materials/Parts
Nuts, Self-locking
Washers, Lock
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version