|
|
TM 9-6115-663-13&P
b. Installation
This task covers: a. Removal
INITIAL SETUP
Equipment Conditions
Tools
Reference
Tool Kit, General Mechanic's
Trailer support devices are
(item 1, appendix B)
lowered, paragraph 2-3.2.1.
Materials/Parts
Nut, Self-locking
REMOVAL
bolts (2) that secure rear step (4) to trailer frame. Discard self-locking nuts.
2. Remove five self-locking nuts (5), flat washers (3), and bolts (2), that secure rear step (4) to
fender (1). Discard self-locking nuts.
3. Remove rear step (4) from trailer.
INSTALLATION
1. Position rear step on trailer frame and align five mounting holes of the rear step (4) and fender (1).
2.
Install five bolts (2) ten flat washers (3), and five new self-locking nuts (5) that secure the rear step
(4) to fender (1). Do not tighten bolts.
Install two bolts (2), four flat washers (3), and two new self-locking nuts (5) to secure rear step (4) to
3.
trailer frame.
4. Tighten all bolts.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |