Unpacking Power Unit

TM 9-6115-663-13&P

WARNING

Steel strapping used in packaging has sharp edges. To avoid injury to personnel, use

care when cutting and handling steel strapping.

Using metal cutters, carefully cut metal strapping from box covering generator set xccessary box, and when

unpacking unit A, the switch box. Remove metal strapping.

Remove box cover over generator set by lifting off the cover.

Refer to figure 4-2 and remove wooden wedges, spacers, and fiberboard caps from around generator set skid

bases.

Technical manuals are packaged and maybe attached to barrier material. If so, remove and save technical

manuals.

Remove barrier material from generator sets.

g. Remove packaged fire extinguisher from within generator set enclosures. Unpack and secure fire extinguisher

in bracket on trailer.

Open accessory box and remove all packaging/cushioning material from accessories.

Using the packing list(s) removed in step a., inventory the accessories. Check missing items against shortage

packing (if any). Report any discrepancies to your supemisor.

Refer to paragraph 4-19 and install accessory bOX.

Stow accessories in accessory box.

Stow technical manuals in generator set document box.

CHecking Unpacking. Equipment.

4-4.2

Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the

damage on SF 364, Report of Discrepancy (ROD).

Check the equipment against the packing list(s) to see if the equipment is complete. Report all discrepancies in

accordance with the instructions in DA PAM 738-750.

Check to see whether the equipment has been modified.

Deprocessing Unpacked Equipment.

4-43

Refer to DA Form 2258, Depreservation Guide for Vehicles and Equipment, packed with the equipment. The

depreservation guide explains what was done to the equipment prior to packing. It also explains what has to be done

before placing the equipment in operation. Perform all d e preservation actions required by the depreservation guide.

4-5 INSTALLATION INSTRUCTIONS.

4-5.1

TOOLS, TEST EQUIPMENT, AND MATERIALS REQUIRED FOR INSTALLATION.

A general mechanics tool kit is required for installation of the power plant/power unit.

4-5.2

ASSEMBLY OF EQUIPMENT.

Change 2 4 - 4 . 1