Figure G-1. B Unit Cable Assembly W19 (Sheet 2).

TM 9-6115-661-13&P

NOTES:

1. CRIMP CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-E-45782.

2. AT CONNECTOR END OF CABLE, GROUNDING CONDUCTORS SHALL BE TWISTED TOGETHER TO FORM A

SINGLE CONDUCTOR WHICH SHALL BE CRIMPED IN APPLICABLE CONTACT.

3. AT PIGTAIL END OF CABLE, THE FOUR 8 AWG GROUNDING CONDUCTORS SHALL BE TWISTED TOGETHER,

STARTING AT THE JACKET. CONDUCTORS SHALL BE SOLDER COATED FOR A LENGTH OF .250 FROM END

USING SOLDER, FIND NO. 5.

4. AT PIGTAIL END OF CABLE, EACH INSULATED CONDUCTOR SHALL HAVE THEIR INDIVIDUAL STRANDS

TWISTED TOGETHER AND SOLDER COATED FOR A LENGTH OF .125 FROM END USING SOLDER, FIND NO. 5.

5. INSULATION COLORS, IN ACCORDANCE WITH WIRE TABLE, SHALL BE INCLUDED AS PART OF THE

ORDERING DATA.

6. HOT STAMP "97403-13229E5674-" AND "W19" IN .23-.39 HIGH WHITE CHARACTERS ON INSULATION

SLEEVING, FIND NO. 3, IN ACCORDANCE WITH MIL-M-60903.

7. HOT STAMP TERMINAL DESIGNATION, AS SHOWN IN WIRE TABLE, USING .09-.16 HIGH BLACK

CHARACTERS, IN TWO PLACES (180 APART) ON INSULATION SLEEVING, FIND NO. 4, IN ACCORDANCE

WIRE LIST

Figure G-1. B Unit Cable Assembly W19 (Sheet 2).

G-3