How to do the Task - TM-9-6115-661-13-P0024

TM 9-6115-661-13&P

(1) You know what is needed

(2) You have everything you need

(3) You understand what to do

b. If parts are listed, they can be drawn from technical supply. Before you start the task, check to

make sure you can get the needed parts. National stock numbers (NSNs) and part numbers for

generator set parts are listed in the generator Repair Parts and Special Tools List (RPSTL)

manual, TM 9-6115-643-24P, and the engine RPSTL manual, TM 9-2815-254-24P. NSNS and

part numbers for the 1-ton trailer chassis parts are listed in TM 9-2330-202-14&P. NSNS and

part numbers for the high mobility trailer chassis parts are listed in TM 9-2330-392-14&P.

NSNS and part numbers for the 2 l/2-ton trailer chassis parts are listed in TM 9-2330-205-

14&P. NSNS and part numbers for the next higher assembly (the power unit or power plant,

less generator set(s) and trailer chassis) are listed in Appendix F.

c. If expendable/durable supplies or materials are needed, get them before starting the task.

Refer to Appendix E for the correct nomenclature and NSN.

How to do the Task. Before starting, read the entire task. Be sure that you understand the entire

procedure before you begin the task. As you read, remember the following:

a. PAY ATTENTION TO WARNINGS, CAUTIONS, AND NOTES.

b. Use the GLOSSARY if you do not understand the special abbreviations or unusual terms used

in this manual.

c. The following are standard maintenance practices. Instructions about these practices are

usually not included in task steps. When standard maintenance practices do not apply, the

task steps will tell you. The standard maintenance practices are: