Table 5. Electrical System Troubleshooting Procedures - continued

TM 9-2320-391-10

ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0069 00

ELECTRICAL SYSTEM Continued

Table 5. Electrical System Troubleshooting Procedures Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

WARNING

Electrical power is still present inside the battery disconnect

enclosure with the MBDS in the disconnect (OFF) position. Do not

touch the studs of the MBDS. Failure to comply may result in

injury or death to personnel.

Remove rings, bracelets, wristwatches, neck chains, and any

other jewelry before working around vehicle. Jewelry may catch

on equipment of may short across an electrical circuit or battery

terminal. Failure to comply may result in serious injury or death to

personnel.

6. ENGINE CRANKS

4. Remove six screws, washers,

BUT DOES NOT START

and cover from battery

- Continued

disconnect enclosure.

5. Check to see if circuit breaker

CB60 is tripped.

0069 00-19