Table 5. Electrical System Troubleshooting Procedures - continued

TM 9-2320-391-10

ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0069 00

ELECTRICAL SYSTEM Continued

Table 5. Electrical System Troubleshooting Procedures Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

6. ENGINE CRANKS

4. If engine cranks but does not

BUT DOES NOT START

start, check circuit breakers

- Continued

to see if it is tripped again. If

circuit breaker is tripped or

trips again, notify Field

Maintenance.

5. Install PDP cover (WP 0095

6. If engine cranks but still does

not start, notify Field

Maintenance.

3. Is circuit breaker

1. Position MBDS to disconnect

CB60 tripped?

WARNING

Vehicles are equipped with a Load and Battery Control Device

(LBCD). The LBCD has internal capacitors that must be discharged

prior to performing maintenance or troubleshooting procedures.

Failure to comply may result in damage to equipment and/or injury

to personnel.

2. Position master power switch

to on for 30 seconds (WP

3. Position master power switch

0069 00-18