|
|
TM 9-2320-391-10
CENTRAL TIRE INFLATION SYSTEM (CTIS)
OPERATION
INITIAL SETUP:
Maintenance level
References
Operator
GENERAL
The Central Tire Inflation System (CTIS) allows the operator to adjust tire pressures for
current vehicle operating conditions. This work package provides the data and procedures
for operating the CTIS. Items covered include Normal CTIS Operation, Operation In
Emergency (EMER) Mode, Operation In RUN FLAT, Operation With Four CTIS ECU Mode
Lights Flashing; and Resetting the CTIS.
NORMAL CTIS OPERATION
1.
Start engine (WP 0016 00).
NOTE
If vehicle is stopped when CTIS mode is changed, it may be necessary to
increase engine speed to provide adequate air supply to tires.
CTIS will automatically shut off when air system pressure drops below 74 psi
(510 kPa), or when CTIS malfunction occurs.
2.
Slowly press down on accelerator pedal (1) if FRONT BRAKE AIR pressure gage (2)
and REAR BRAKE AIR pressure gage (3) read less than 100 psi (690 kPa).
0020 00-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |