M1079A1 VAN PREPARATION FOR MOVEMENT

TM 9-2320-391-10

M1079A1 VAN PREPARATION FOR MOVEMENT

0014 00

INITIAL SETUP:

Maintenance level

References

Operator

GENERAL

The preparation for movement work package provides the data and the procedures for

preparing to move the M1079A1 van.

PREPARATION FOR MOVEMENT

WARNING

Heavy object/loads, such as tool boxes and heavy parts, must

always be carried on the floor with the weight distributed as

equally as possible between left and right sides of M1079A1 van.

Failure to comply decreases the stability of the M1079A1 van and

will increase the likelihood of a rollover.

Heavy cabinets must always be mounted as low as possible with the

weight distributed as equally as possible between left and right

sides of M1079A1 van. Remember to consider the weight of the

items that will be stored in the cabinets.

Failure to comply

decreases the stability of the M1079A1 van and will increase the

likelihood if a rollover.

Always keep in mind, when placing items inside the M1079A1 van,

that heavier items must always be positioned as low as possible and

the weight distributed as equally as possible between left and right

sides of M1079A1 van. Failure to comply decreases the stability of

the M1079A1 van and will increase the likelihood of a rollover.

All objects that can shift during movement will be secured by using a bracing,

cushioning, or tie-down method. The method used will be performed in a manner

that will not cause damage to the walls or equipment.

Verify that all workbenches, lockers, cabinets, and shelves are securely attached to

walls and floor.

0014 00-1